TL343 THREADLOCKER (MEDIUM STRENGTH)
General purpose, medium-high strength, thixotropic removable anaerobic nutlock. Can be applied to all sizes of nuts and bolts. Does not run off, drip, or migrate after assembly. Easy application. Used on mounting bolts, housing screws, mechanical adjustment bolts, hydraulic system bolts, roller bearing bolts, conveyor belt bolts,etc.
FEATURES:
The product cures when confined in the absence of air between closefitting metal surfaces.
Formulated to lock all metric and imperial nuts and bolts, preventing vibration loosening and leakage through the threads.
TL-43 is typically used on mounting bolts, housing screws, etc. TL-43 prevents corrosion of assembled parts.
Provide resistance to vibration
Removable with hand tools
APPLICATION:
1) Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
2) Apply the adhesive with a 360 turn to leading first three threads of the male and female fittings.
3) Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
4) Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
5) For disassembly, use hand tools to remove mating parts.
6) When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
TECHNICAL INFORMATION:
Colour: Blue
Corrosive:Non-corrosive
Flash Point: >93°C
Gap Filling: up to 0.25mm
Shelf Life: 36 Months
Specific Gravity: 1.030
Temperature range : -50°C to 150°C
Viscosity: 4000 - 5000 cPs (@20 rpm)
STORAGE AND SHELF LIFE:
Keep product in its original container at 22°C and avoid to contact with direct sunlight. Storage below 5°C and above 30°C can negatively affect product properties.
Shelf life: 36 months.
PACKAGING:
50 ml x 120 pcs / box
250 ml x 36 pcs / box