GM174 GENERAL PURPOSE GASKET MAKER

GM174 is pale orange coloured, general purpose gasket maker in the form of thick paste.

Fills the gaps between two parts and closes like a flexible gasket. Provides impermeability at low pressure even right after the application.


 

FEATURES:

  • Provides impermeability at low pressure even right after the application 

  • Can be used on other gaskets. 

  • Flexible and non-dripping 

  • Vibration-resistant 


 

APPLICATION AREAS:

  • Fuel and water pumps, bearing boxes, engine thermostats, air compressors, pumps in various combinations, fuel tanks, etc. 

 

APPLICATION:

1) Clean surfaces before assembly. If possible use sandpaper before cleaning.

2) Apply the adhesive to both surfaces.

3) Roller or brush can be used to apply adhesive

4) Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.

5) For disassembly, use hand tools to remove mating parts.

6) When it is hard to dissemble at room temperature, apply local heat until reaching 150°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.

 


 

TECHNICAL INFORMATION:

Average handling time: 15 min.

Colour: Pale orange

Corrosive: Non-corrosive

Flash Point: >93°C

Gap Filling: up to 0.5mm

Shelf Life:  36 months

Specific Gravity: 1.08

Temperature range:  -50°C to +150°C'ye

Viscosity:  60000 - 100000 cPs (@2.5 rpm)



STORAGE AND SHELF LIFE:

Keep product in its original container at 22°C and avoid to contact with direct sunlight. Storage below 5°C and above 30°C can negatively affect product properties.

 Shelf life: 36 months.


 

PACKAGING:

50 ml x 72 pcs / box

50 ml (Pump) x 72 / box

250 ml x 54 pcs / box

Learn More

Related Products