Botz Crystal Clear is an environmentally friendly, single component, high modulus MS Polymer Sealant. It's a mounting adhesive and sealant with a crystal-clear structure. Does not contain any solvents and isocyanates.
Features:
Fast curing – 15 minutes after application.
Non-staining on natural stones, marbles, granites, and such substrates.
Excellent adhesion to most materials such as metal, aluminum, glass, wood, stainless steel, copper, iron, brick, concrete, some plastics, and their combinations...
Excellent color stability, non-yellowing.
Not affected by surface moisture during curing, does not bubble.
Does not contain any hazardous chemicals, odorless.
Excellent UV resistance.
Over-paintable.
Non-sagging.
Non-shrinking.
Weatherproof.
Application areas:
Suitable for sanitary applications.
Construction boards: Plywood, laminated timber, OSB, Chipboard…
All vibrating metal joints of all types of vehicles.
Windows, frames, doorsteps, decorative frames.
Structural bonding in vibrating constructions.
Insulation materials: Polystyrene, mineral wool, fiberglass, polyurethane…
Floor joints, stair steps, and roof edges.
Greenhouses.
Technical info:
Basis: MS Polymer
Consistency: Stable Paste
Curing system: Moisture Curing
Tack-free time: Ca. 5 mins
Skin formation time * (20 °C / 65% R.H.): Ca. 20 mins
Curing speed * (20°C / 65% R.H.): 2,5-3,5 mm/24h
Hardness (DIN 53505) : 40 ± 5 Shore A
Density: 1,05 ± 0,05 g/ml
Temperature resistance:-40 °C → 90 °C
Max. tension (DIN 53504 : > 0,60 N/mm²
Elasticity modulus 100% (DIN 53504) : > 2 N/mm²
Elongation at break (DIN 53504) : > 500%
Application temperature : +5 °C - +35 °C
(*) these values may vary depending on environmental factors such as temperature, moisture, and type of substrates.
Application Method :
Surfaces which contact with sealant must be clean and dry and not contain any oil, dust or rust. Non-porous surfaces must be cleaned in advance with a suitable solvent. Applied solvent must be wept well from the surface without allowing it to evaporate. Applying masking tape around the application joints prevents smudging and provides a more aligned application. Masking tape must be removed promptly after application. Primer is not needed before the application on non-porous surfaces like faience, ceramics and glass. Primer use may be required for some metal and plastic types.
Application: with manual - or pneumatic caulking gun.
Remarks:
• Botz Cristal Clear may be overpainted with water-based paints, however, due to a large number of paints and varnishes available we strongly suggest a compatibility test before application.
• The drying time of alkyd resin-based paints may increase.
• Can be applied to a wide variety of substrates. We recommend a preliminary compatibility test because specific substrates such as plastics, polycarbonate, etc, may dier from manufacturer to manufacturer.
• Can not be used as a glazing sealant.
• Not suitable for bonding aquariums.
•Can be used for bonding of and sealing on natural stone.
• Do not use in applications where continuous water immersion is possible.
• A total absence of UV can cause a color change of the sealant.
• When using different reactive joint sealants, the first joint sealant must be completely hardened before the next one is applied.
• Discoloration due to chemicals, high temperatures, UV radiation may occur. A change in color does not affect the technical properties of the product.
• Contact with bitumen, tar, or other plasticizer releasing materials such as EPDM, neoprene, butyl, etc. is to be avoided since it can give rise to discoloration and loss of adhesion.
Shelf life: 15 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°C.
Packaging :
290 ml cartridge
600 ml saussage
Color: Transparent