Botz High Flex is an environmentally friendly, single component, low modulus, high-flex, MS Polymer Sealant for the construction industry. Thanks to its high flexibility, Botz High Flex is preferred, especially in joint assembly applications. Does not contain any solvents and isocyanates.
Features:
Permanent elasticity.
Excellent absorption of acoustic vibrations.
Excellent color stability, non-yellowing.
Excellent UV resistance.
Over-paintable.
Non-sagging.
Non-shrinking.
Weatherproof.
Not affected by surface moisture during curing, does not bubble.
Does not contain any hazardous chemicals, odorless.
Excellent adhesion to most materials such as metal, aluminum, glass, wood, stainless steel, brick, concrete, copper, and some plastics, and their combinations.
Application areas:
Sealing and bonding in the building and construction industry.
Strong elastic bonding in vibrating constructions.
Winter gardens and other framework joints.
Suitable for all types of joints; precast, concrete, wood, aluminum, glass...
Sanitary applications.
Sealing of floor joints.
Technical info:
Basis: MS Polymer
Consistency: Stable Paste
Curing system: Moisture Curing
Tack-free time: Ca. 25 mins
Skin formation time: (20 °C / 65% R.H.): Ca. 60 mins
Curing speed: (20°C / 65% R.H.): 2,5 mm / 24h
Hardness (DIN 53505): 30 ± 5 Shore A
Density: 1,34 ± 0,05 g/ml
Temperature resistance: -40 °C → 90 °C
Max. tension (DIN 53504 : > 2,40 N/mm²
Elasticity modulus 100% (DIN 53504) : > 0,50 N/mm²
Elongation at break (DIN 53504) : > 800%
Application temperature : +5 °C - +35 °C
Chemical Resistance: Good resistance to (salt)water, aliphatic solvents, hydrocarbons, ketones, esters, alcohols, diluted mineral acids and alkalis. Poor resistance to aromatic solvents, concentrated acids and chlorinated hydrocarbons.
Application method:
Surfaces which contact with sealant must be clean and dry and not contain any oil, dust or rust. Non-porous surfaces must be cleaned in advance with a suitable solvent.
Applied solvent must be wept well from the surface without allowing it to evaporate. Applying masking tape around the application joints prevents smudging and provides a more aligned application. Masking tape must be removed promptly after application.
Primer is not needed before the application on non-porous surfaces like faience, ceramics and glass. Primer use may be required for some metal and plastic types.
Application: with manual - or pneumatic caulking gun.
Packaging :
290 ml cartridge
600 ml saussage
Colors:White, Grey, Black, Brown