Low modulus, neutral silicone sealant suitable for weather-resistant applications, particularly for glazing and weather-sealing applications in curtainwall and building facades.
FEATURES
- High movement capability, low-modulus sealant
- Excellent unprimed adhesion on a wide variety of construction materials: concrete, stone, brick, wood, steel, glass, etc.
- Durable and resistant to weather conditions and temperature shifts
- Very fast cure, does not pick up dirt
- Does not crack
- Solvent-free, non-shrink
- Non-corrosive
APPLICATION AREAS
- Expansion joints on curtainwalls and building facades
- Weather-resistant sealing, bonding, and glazing applications
TECHNICAL INFO
- Curing: Single component oxime
- Consistency: Thixotropic
- Density: 1.03 g/ml ±0.02 , 1.45 g/ml ±0.02
- Tack-free Time: ~20 minutes
- Curing Rate (20°C/65% RH): 2–3 mm/day
- Shrinkage: <5%
- Hardness: 35 ± 5 Shore A
- Elongation at Break (DIN 53504): >450%
- Elastic Recovery (ISO 7389): >70%
- Modulus of Elasticity at 100% (DIN 53504): 1 N/mm²
- Max Tension (DIN 53504): >0.25 N/mm²
- Temperature Resistance (Cured): -60°C to +180°C
- Application Surface Temperature: +5°C to +40°C
APPLICATION METHODS
- Clean joints from old silicones, dirt, dust, loose particles, and contaminants
- Fill joint gaps with PE backing material before application
- Cover sides of joints with masking tape
- Application width should be between 6–30 mm
- For widths above 10–12 mm, sealant depth should be approximately half of its width
- Applied silicone may be corrected within 5–10 minutes
- If masking tape is used, remove it immediately after correction
SHELF LIFE
15 months in unopened cartridges when stored in cool, dry conditions between +5°C and +25°C.
PACKAGING
- Volume: 310 ml cartridge; 600 ml sausage
- Colors: White, Black, Aluminum, Gray, Brown