BOTZ AS52 is a two-component epoxy acrylate based chemical anchoring system designed for a wide range of structural construction applications. The styrene-free formulation ensures very low odour, making the product suitable for both indoor and outdoor use.
BOTZ AS52 is intended for heavy-duty anchoring in cracked and non-cracked concrete, masonry and other base materials such as aerated concrete, lightweight solid or hollow concrete blocks and sand-lime bricks. The chemical anchor is suitable for post-installed rebar connections from Ø8 to Ø32.
• Masonry support systems
• Handrails, fences and balcony parapets
• Road signs
• Pipe and ventilation systems
• Lighting systems and canopies
• Safety barriers
• Racking systems
• Machinery anchoring
• Post-installed reinforcement bars
• Approved for structural applications in cracked and non-cracked concrete (M8–M30)
• Rebar diameter range Ø8–Ø32 mm
• Design working life 50–100 years
• Suitable for dry, wet and water-filled holes
• Service temperature range from –40°C to +80°C (long-term max. +50°C)
• Suitable for high load applications
• Styrene-free formulation (SF)
• Compatible with various building materials including perforated brick
• For heavy anchoring, doweling and post-installed rebar connections
• Low odour and low VOC content (VOC A+)
• Seismic performance category C1
Property | Value |
Base | Epoxy acrylate |
Appearance | Paste |
Color | Grey |
Viscosity | Thixotropic, high |
Density (+20°C) | 1.7 g/ml |
Hardness | Shore D 90 |
Service temperature | –40°C to +80°C (max long term +50°C) |
Tensile Modulus | 13800 N/mm² |
Compressive Strength | 95 N/mm² |
Open the cap at the tip of the cartridge.
Cut the foil below the metal clip (required for 300 ml cartridge).
Place the mixing nozzle on the cartridge (screw down tightly).
Place the cartridge into the application gun.
Extrude approx. 10 cm of product to ensure homogeneous mixing.
Choose the drill bit suitable for the diameter of the anchor shown in the consumption table.
Clean the inside of the hole using an air pump or brush.
Fill approx. 2/3 of the hole by injecting BOTZ Chemical Anchor.
Insert the anchoring bar while rotating. Excess resin must overflow from the hole.
Working and Loading Time
The table below represents the working and loading time of AS52 chemical anchor at different temperatures.
Working time is the typical time to gel. Loading time is the typical time to reach full capacity.
Base temperature | Working time (min) | Loading time (min) |
+5°C | 18 | 150 |
+5°C to +10°C | 10 | 150 |
+10°C to +20°C | 6 | 85 |
+20°C to +25°C | 5 | 50 |
+25°C to +30°C | 4 | 40 |
+30°C | 3 | 35 |
Consumption depends on the dimensions of the threaded bar and drilled hole.
The table below shows theoretical consumption with recommended application parameters.
Threaded bar | Diameterof threaded bar Ø (mm) | Diameter of hole in concrete Ø(mm) | Anchoring depth (mm) | Consumption per hole (ml) | 300 ml | 345 ml | 410 ml |
M8 | 8 | 10 | 80 | 3 | 87 | 100 | 119 |
M10 | 10 | 12 | 90 | 4 | 63 | 73 | 86 |
M12 | 12 | 14 | 110 | 6 | 44 | 50 | 60 |
M16 | 16 | 18 | 125 | 9 | 29 | 34 | 40 |
M20 | 20 | 24 | 170 | 31 | 8 | 10 | 11 |
M24 | 24 | 28 | 210 | 45 | 6 | 7 | 8 |
M27 | 27 | 32 | 250 | 75 | 3 | 4 | 5 |
M30 | 30 | 35 | 280 | 93 | 2 | 3 | 4 |
300 ml, 345 ml, 410 ml cartridges / each cartridge includes 2 static mixers.