AS50-SF STYRENE-FREE POLYESTER CHEMICAL ANCHOR

BOTZ AS50-SF® Chemical Anchor is a high-quality, general-purpose, two-component polyester-based anchoring system, STYRENE-FREE, specially developed for a wide range of construction anchoring applications.
 It is recommended for anchoring threaded rods into concrete, as well as for masonry and hollow base materials. Suitable for medium loads in horizontal and vertical applications thanks to its thixotropic consistency.


Features

• Cost-effective
• Saves time and labor
• Fast curing and setting
• Can be applied at low temperatures
• High mechanical strength
• Compatible with many construction materials
• Thixotropic, non-sagging


Application Areas

  • Anchoring and bonding of concrete, marble, stone into perforated brick and block walls

  • Machinery and equipment installation

  • Satellite and TV system installation

  • Radiators, pipelines, lighting fixtures

  • Road signs and guardrails

  • Railings, fences, balcony parapets

  • Kitchen and bathroom cabinets

  • Sanitary ware and accessories

  • GSM base stations

  • Decorative panels on walls and ceilings


Technical Information

Base

Polyester

Appearance

Paste

Color

Grey

Viscosity

 Resin: 110000 cP (@12 rpm)  Hardener: 120000 cP (@12 rpm)                                

Density (22°C)

1.72 (resin) –1.50 (hardener) g/cm³

Non-volatile content

87% (resin), 95% (hardener)

Service temperature

–40°C to +80°C

Compressive strength (EN 12190)

 Class R2

Chloride content (EN 1015-17)

0.0056%

Flash point 

33°C (Resin)



Application Method

Cartridge Preparation:

  1. Open the cap at the tip of the cartridge.

  2. Cut the foil below the metal clip (required for 300 ml cartridge).

  3. Place the mixing nozzle on the cartridge (screw down tightly).

  4. Place the cartridge into the application gun.

  5. Extrude approx. 10 cm of product to ensure homogeneous mixing.

Application:

  1. Choose the drill bit suitable for the diameter of the anchor shown in the consumption table.

  2. Clean the inside of the hole using an air pump or brush.

  3. Fill approx. 2/3 of the hole by injecting BOTZ Chemical Anchor.

  4. Insert the anchoring bar while rotating. Excess resin must overflow from the hole.

 

Performance and application table 

Test parameters: +24°C - +40°C

Allowable Loads : Concrete C20/25

Threaded rod

5.8 Grade

Drill Hole Ø (d0) mm

Embed. depth (hef) mm

Edge distance (Ccr) mm

Spacing (Scr) mm

Torque moment (Tinst)

Tensile (kN)

Shear (kN)

M8

10

80

90

180

10

9.0

5.4

M10

12

90

105

210

20

13.0

8.7

M12

14

110

120

240

40

17.5

12.5

M16

18

125

140

300

60

24.0

22.5

M20

24

170

170

350

120

29.0

35.0

M24

28

210

210

430

150

39.0

53.0


 

Working & Loading Time

Temperature of base material

+5°C

+10°C

+20°C

+30°C

+35°C

Working time (mins)

25

15

6

4

2

Loading time (mins)

120

80

45

25

15



Consumption per Hole

Threaded bar

Bar Ø (mm)

Hole Ø(mm)

Depth (mm)

Consumption per hole (ml)

300 ml

345 ml

410 ml

M8

8

10

80

5

55

65

75

M10

10

12

90

8

35

42

50

M12

12

14

110

14

21

25

30

M16

16

18

125

26

11

13

15

M20

20

24

170

49

5

7

8

M24

24

28

210

173

1

2

2


Storage & Shelf Life

Store at +5°C to +25°C, avoid direct sunlight. 

Shelf life: 18 months in unopened original packaging.


Packaging

300 ml, 345 ml, 410 ml cartridges / each cartridge includes 2 static mixers.

Learn More

Related Products