BOTZ AS50 is a high-quality, two-component polyester-based chemical anchor designed for versatile construction anchoring. Recommended for threaded rods in concrete, brickwork, and hollow block walls. Suitable for medium loads both horizontally and vertically thanks to its thixotropic consistency.
Features
• Cost-effective
• Saves time and labor
• Fast curing and setting
• Can be applied at low temperatures
• High mechanical strength
• Compatible with many construction materials
• Thixotropic, non-sagging
• Easy to use with standard sealant gun
Anchoring and bonding of concrete, marble, stone into perforated brick and block walls
Machinery and equipment installation
Satellite and TV system installation
Radiators, pipelines, lighting fixtures
Road signs and guardrails
Railings, fences, balcony parapets
Kitchen and bathroom cabinets
Sanitary ware and accessories
GSM base stations
Decorative panels on walls and ceilings
Base | Polyester |
Appearance | Paste |
Color | Grey |
Viscosity | 120,000–200,000 mPa.s |
Density (22°C) | 1.60–1.70 g/cm³ |
Non-volatile content | 87% (resin), 95% (hardener) |
Service temperature | –40°C to +80°C |
Compressive strength (EN 12190) | 82 N/mm², Class R2 |
Chloride content (EN 1015-17) | 0.0056% |
Glass transition temperature (EN 12614) | 74°C |
Fire resistance (EN 13501-1) | Euroclass E |
Open the cap at the tip of the cartridge.
Cut the foil below the metal clip
Place the mixing nozzle on the cartridge (screw down tightly).
Place the cartridge into the application gun.
Extrude approx. 10 cm of product to ensure homogeneous mixing.
Choose the drill bit suitable for the diameter of the anchor shown in the consumption table.
Clean the inside of the hole using an air pump or brush.
Fill approx. 2/3 of the hole by injecting BOTZ Chemical Anchor.
Insert the anchoring bar while rotating. Excess resin must overflow from the hole.
Threaded rod | Hole Ø (d0) mm | Embed. depth (hef) mm | Edge dist. (Ccr) mm | Spacing (Scr) mm | Torque (Nm) | Tension (kN) | Shear (kN) |
M8 | 10 | 80 | 80 | 160 | 10 | 8.7 | 5.4 |
M10 | 12 | 90 | 90 | 180 | 20 | 13.7 | 8.7 |
M12 | 14 | 110 | 110 | 220 | 40 | 16.9 | 12.5 |
M16 | 18 | 125 | 125 | 250 | 60 | 24.1 | 22.5 |
M20 | 24 | 170 | 170 | 340 | 120 | 35.8 | 35.0 |
M24 | 28 | 210 | 210 | 420 | 150 | 52.0 | 50.0 |
Temperature | +5°C | +10°C | +20°C | +30°C | +35°C |
Working time (min) | 25 | 15 | 6 | 4 | 2 |
Loading time (min) | 120 | 80 | 45 | 25 | 15 |
Threaded rod | Hole Ø (mm) | Depth (mm) | Consumption (ml) | 300 ml | 345 ml | 410 ml |
M8 | 10 | 80 | 5 | 55 | 65 | 75 |
M10 | 12 | 90 | 8 | 35 | 42 | 50 |
M12 | 14 | 110 | 14 | 21 | 25 | 30 |
M16 | 18 | 125 | 26 | 11 | 13 | 15 |
M20 | 24 | 170 | 49 | 5 | 7 | 8 |
M24 | 28 | 210 | 173 | 1 | 2 | 2 |
Store at +5°C to +25°C, avoid direct sunlight. Shelf life: 18 months in unopened original packaging.
300 ml / each cartridge includes 2 static mixers.