PU MONTAGE ADHESIVE LIQUID NAIL
Liquid nail is a fast curing PU montage adhesive with water and humidity resistant.
- Product Code: PMA 585
- Gross Weight: 395 gr
- Volume: 310 ml
- Shelf Life: 12 months
- Color: Transparent
Specifications
- Very rapid cure; short open-time and minimum clamping-time
- Becomes tack-free within ten minutes; maximum strength in up to 12 hours
- Gap filling property
- Resistant to humidity, water and sea water; meets D4
- Bonds almost every sort of wood to eat other and to metal, tile, glass and stone
- Transparent
- Non-sag gel consistency.
Application Areas
- Wooden furniture production
- Boat and yacht production
- Wooden door and window production and assembly
- Bonding concrete ,most metal, glass, tile, rock wool, wood, polystyrene, PVC, marble, granite, ceramics,glass, etc.
- Water-resistant -D4 class according to DIN EN 204
Technical Info
- Appearance: Transparent in jel consistency
- Open time: 10 minutes
- Clamping time: 30 minutes
- Density: 1,15 gr/ml
- Water and humidity resistancy: D4
- Application temperature: 10-30C
- Service Temperature: Between -15C to 80C
Application Methods
- Should not be applied in temperatures below 5C
- Bonding substrates should be free of oil, dust, dirt and loose particles.
- The adhesive should be applied as a thin layer in one of the bonding substrates.
- Non-porous and dry bonding substrates should be humidified with a wet cloth.
Warnings
- Since the open-time of the adhesive is very short clamping of the elements must be completed rapidly
- When hardened, the colour of the adhesive turns white.
- Adhesive must be spread on the substrates and applied as a thin layer
- In applications below 10C curing time will be prolonged
- Full cure can take up to 12 hours
- Dry substrates must be humidified with a wet cloth
Safety Info
It contains isocyanate. If inhaled for long periods, it may cause sensitivity on respiratory organs. If the wet adhesive contacts the skin for long periods, it may cause local rash and sensitivity on the skin. For this reason the environment should be well-ventilated during the application, contact with the skin should be avoided and protective gloves and safety goggles should be worn while working. Hardened Pu adhesive does not carry a health risk towards environment and human health.
