NEUTRAL SILICONE

Compatible with mirrors, sensitive metal and concrete surfaces, it is a multi-purpose neutral silicon with strong adherence. Stays flexible at all times and endures weather conditions. It is pure silicone, does not lose volume.

  •     Product Cod e: PMS-550
  •     Gross Weight: 370gr
  •     Shelf Life: 15 months
  •     Colors: Translucent, white, black , aluminum, gray, brown

Compatible with mirrors, sensitive metal and concrete surfaces, it is a multi-purpose neutral silicon with strong adherence. Stays flexible at all times and endures weather conditions. It is pure silicone, does not lose volume.

  •     Product Cod e: PMS-550
  •     Gross Weight: 370gr
  •     Shelf Life: 15 months
  •     Colors: Translucent, white, black , aluminum, gray, brown

SPECIFICATIONS

  • Adheres strongly on porous or nonporous building materials as concrete, stone, brick, ceramics, glass, metal and wood.
  • Does not cause corrosion on metal surfaces or concrete.
  • Emits very little odor while drying.
  • Durable at temperature changes or adverse weather conditions.
  • Does not lose volume, so it can be used long term.
  • Does not emit acids while drying, so it is not corrosive.
  • Endures weather conditions and UV rays for long years.

APPLICATION AREAS

  • Fixating mirrors.
  • Leak-proofing applications around window panes.
  • On flexing joints and grouts at high buildings.
  • Leak-proofing application on acid sensitive alkali and metal surfaces.
  • On concrete, brick, steel, chrome, brass, zinc, copper, enamel, epoxy, polyester, PVC, ceramic, tile and glass surfaces.

TECHNICAL INFO

  • Curing: Single component oxime
  • Density: 1,03 gr/lt
  • Non-sticking Period: 25 minutes
  • Drying Period: 3 mm/day
  • Shore A Hardness: 22
  • Elongation at Break: 480%
  • Operating Temperature: Between -40°C and +120°C

APPLICATION METHODS

  • Make sure application surfaces are clean and dry and free of grease and dust.
  • If there is previously applied silicone on the surface, it should be cleaned mechanically and after that it should be cleaned with a solvent like thinner.
  • Sides of joints and grouts should be covered with masking tape.
  • Application width should not be longer than 20 mm.
  • For applications more than 10-12 mms, the depth of the sealant should be approximately half of its width.
  • Applied silicone may be corrected within 5-10 minutes.
  • If using masking tape, it should be removed right after the correction.
  • Silicone smeared around can be cleaned with thinner.