BOTZ GM110 High Temperature Resistant Gasket Maker
Information
- GM110 is pink coloured, high-temperature resistant, fast curing liquid gasket maker used in all metal parts.
- Seals perfectly at temperatures up to 200°C.
 |
 |
Features and Applications
Features
-
Seals perfectly at temperatures up to 200°C.
-
Can be applied in every position at high temperatures
Application
-
Fuel and water pumps, bearing boxes, engine thermostats, air compressors, pumps in various combinations, fuel tanks, etc.
Usage and Instructions
Surface Preparation
1) Ensure parts are clean, dry and free from oil and grease.
Application
1) Clean surfaces before assembly. If possible use sandpaper before cleaning.
2) If curing speed is low due to inactive metal surface or high surface gap, AC-64 Anaerobic Activator should be applied to surfaces before adhesive.
3) Apply the adhesive to both surfaces
4) Roller or brush can be used to apply adhesive.
5) Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of gasketing compound.
6) For disassembly, use hand tools to remove mating parts.
7) When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
Technical Details
Average handling time: 20 minutes (Conditions: 22°C )
Colour: Pink
Corrosive: Non-corrosive
Flash Point: >93°C
Gap Filling: up to 0.4mm
Shelf Life: 24 months
Specific Gravity: 1.1
Temperature range: from -50°C to +200°C
Viscosity: 100000-150000 cPs (@2.5 rpm)
| CODE | AGM-110 | AGM-110 | AGM-110 |
| NAME | GM110 | GM110 | GM110 |
| PACKAGING | 50 ml | 250 ml | 50 ml Pump |
| ITEMS PER BOX | 12 | 9 | 12 |
| ITEMS PER PARCEL | 72 | 54 | 72 |
| ITEMS PER PALLET | 5760 | 1620 | 5760 |
