ADHESIVE FOAM
It is a low swelling and high adhesive polyurethane gun foam which is specially formulated for the bonding of polystyrene-based jacketing plates and jambs.
- Product Code: PMF-625
- Gross Weight: 860gr
- Volume: 750ml
- Shelf Life: 15 months
- Yield: 45-55 liter/1000ml
- Color: Pink
SPECIFICATIONS
- Speeds up and simplifies mounting of insulation panels.
- Contributes to the heat insulation of buildings.
- It is economical, provides savings compared to other alternative adhesives.
- By means of controlled growth, it applies very low pressure on surfaces.
- Contains fire retardant additives.
- It is light, as opposed to bonding plasters, does not bring static weight on buildings.
- Only within hours heat panels can be plastered.
- Dries faster compared to standard foams.
APPLICATION AREAS
- For bonding EPS and XPS insulation panels onto facades of buildings and filling in between the gaps.
- For bonding polystyrene jambs onto concrete, plaster or wood.
- For bonding polyurethane and stone wool panels.
- For bonding common building materials strongly and durably.
TECHNICAL INFO
- Density: 21 kg/m3
- Yield: 45-55 liters/1000ml
- Fire Class (DIN4102): B3
- Shrinkage: 5% max
- Expansion: 30-50 %
- Tack-free: 5-7 minutes
- Color: Pink
APPLICATION METHODS
- Take off the protective lid from the adaptor.
- Attach the foam gun to the adaptor by twisting or,
- Attach the straw to the adaptor SLOWLY by twisting.
- Turn the can upside down and shake vigorously.
- Point the straw to the application area, hold the adaptor and twist the can until the foam comes out.
- To adjust the foam output, turn the can left and right.
- Place the protective lid onto the straw after the end of application.
