Acetoxy based high-performance liquid silicone sealant which maintains its flexibility in temperatures up to +315°C. With no special curing requirements, RTV sealant has a wide range of home, automotive, and industrial applications.
FEATURES:
Acetoxy curing.
Almost odorless cure.
Resists shrinking and cracking caused by exposure to thermal cycling between -50°C ve +315°C
Preserves its elasticity when permanently exposed to temperatures up to 250°C.
Improved oil resistance.
It can be applied to rubber gaskets to improve strength.
APPLICATION AREAS:
In gasket applications where resistance to high temperatures and/or high thermal cycling in car engines, machines, heating systems, industrial ovens, chimneys, etc
TECHNICAL INFO:
Base: Acetoxy
Consistency: Paste
Curing system: By moisture in the air
Open time: Approx. 20 minutes
Curing rate (at 20°C and 65% RH): 2–3 mm / 24 h
Shore A hardness (DIN 53505): 27 ± 5
Density: 1.05 g/l
Temperature resistance (after curing): from -50°C to +250°C, short-term up to +315°C
Shrinkage: Not more than 10%
Elongation at break (DIN 53504): > 300%
Application temperature: from +5°C to +40°C
APPLICATION METHODS:
Make sure application surfaces are clean and dry and free from dirt, grease, or lose particles.
A primer should be applied on very porous surfaces such as natural stone or marble, or else it may stain.
Metal surfaces should be cleaned with a proper solvent prior to the application.
Since it cannot be painted over, it should not be applied to surfaces which will be painted later.
If possible, masking tape should be used around application areas.
WARNINGS!!
Since it will release acetic acid while curing must not be used on sensitive metals like brass and copper.
Not suitable for PP, PP, PTFE, neoprene, and bituminous surfaces.
Not over-paintable.
SHELF LIFE:
15 months in unopened cartridges when stored in cool, dry conditions at temperatures between +5°C and +25°C.
PACKAGING:
280 ml cartridge
Colors: Red, Black, Grey