GM 110 HIGH TEMPERATURE RESISTANT GASKET MAKER

 GM110 is pink coloured, high-temperature resistant, fast curing liquid gasket maker used in all metal parts.Seals perfectly at temperatures up to 200°C.


FEATURES:

  • Seals perfectly at temperatures up to 200°C.

  • Can be applied in every position at high temperatures


 

APPLICATION AREAS: 

  • Fuel and water pumps, bearing boxes, engine thermostats, air compressors, pumps in various combinations, fuel tanks, etc.


 

APPLICATION: 

1) Ensure parts are clean, dry and free from oil and grease.

2) Clean surfaces before assembly. If possible use sandpaper before cleaning.

3) If curing speed is low due to inactive metal surface or high surface gap, AC-64 Anaerobic Activator should be applied to surfaces before adhesive.

4) Apply the adhesive to both surfaces

5) Roller or brush can be used to apply adhesive.

6) Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of gasketing compound.

7) For disassembly, use hand tools to remove mating parts.

8) When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.

 

TECHNICAL INFORMATION:

Average handling time: 20 minutes (Conditions: 22°C )

Colour: Pink

Corrosive: Non-corrosive

Flash Point: >93°C

Gap Filling: up to 0.4mm

Specific Gravity: 1.1

Temperature range: from -50°C to +200°C

Viscosity: 100000-150000 cPs (@2.5 rpm)


 
 

STORAGE AND SHELF LIFE:

Keep product in its original container at 22°C and avoid to contact with direct sunlight. Storage below 5°C and above 30°C can negatively affect product properties.

 Shelf life: 36 months.


 

PACKAGING:

50 ml x 72 pcs / box

50 ml (Pump) x 72 pcs / box

250 ml x 54 pcs / box

Learn More

Related Products