Is a two component marble and natural stone adhesive based on polyester resin.Used for gluing, repairing and filling up porous surfaces of the marble, travertine, natural stones, artificial marble, ceramic, brick and similar materials.Can be used both vertical and horizontal applications.
FEATURES
Rapid cure time (3-5 min. at 25ºC).
Very low shrinkage during hardening.
Easy to apply
Excellent brightness after the use of grinding machines.
Superior resistance to wear of time
High reactivity
Chemically inert and offers extended durability
Very good adhesion on natural stones even at higher temperatures
Temperature resistance of cured adhesive is between 10oC and +100oC
Bonded surfaces are ready to use after 2 hours
No color change, cracking or shrinkage during hardening period
APPLICATION AREAS
It is applied on marble, granite, travertine, natural stone, artificial marble, ceramic, tile, brick, concrete and wooden surfaces.
APPLICATION
The surface must be clean and free from dust and grease.
A component is mixed with b component / hardener at the rate of %2-3 until a homogenous mixture is obtained then applied on the surface.
A homogeneous mixing facilitates uniform catalysis.
The hardener rate depends on temperature and the quantity of the component.
An excess of hardener increase the hardening speed but weakens the adhesive seal.
The surface to be treated must be clean and dry, porosity and the roughness of the surface, favor best adhesion.
TOOLS REQUIRED FOR APPLICATION: Spatula
TECHNICAL INFORMATION
Color | Beige (Comp A) White (Comp B) |
Consistency | :Tixotrophic |
Density | 1,85 ± 0,02 gr/cm3 (+20˚C /Comp.A); 1.8085 gr/cm3 (+20˚C /Comp.B) |
Viscosity | :25˚C 20rpm 200000-350000cps |
Type | Solvent based / Contains styrene/ Polyester based |
Mix ratio | : %2-3 BPO |
Working time | : 5-10 min. |
Application temperature | : +5˚C to +40˚C |
Mixing time | : ~ 1min. |
Min Cure time | : ~3.5 - 5 min. |
Full Cure time | : 10-12 min. |
Flash Point | :33˚C (Comp A) :50˚C (CompB) |
Max. Exotherm during reaction | : 110 - 115˚C |
Min working temperature | : 5˚C |
Max heat resistance | : 100˚C |
Maximum force (kgf) | : 490 |
Maximum elongation (∆/mm) | :1.18 |
Maximum traction (kg /mm2) | :3.8 |
Traction force (kgf) | :490 |
Elongation (∆/mm) | :1.29 |
Elongation % | : 1.7 |
CAUTION
Uncured product can be removed with a suitable solvent.
Mixing the components in correct ratio is critical since the amount of hardener affect working time.
In wall covering application or in case of high range of temperature changes use fixed pins or suitable supports.
The color of the hardened adhesive may change color in case of ultraviolet light exposure.
Keep the container tightly closed during the application.
Apply the resin on a dry and clean surface.
Hardened adhesive is workable after 2-6 hours.
SAFETY MEASURES
Irritating to eyes and skin. Avoid contacting eyes
Do not inhale.
If eyes contact occurs, immediately flush eyes with plenty of water and consult a doctor.
Use only in well-ventilated areas.
Keep away from fire.
Keep locked up and away from children.
Wear gloves during application.
STORAGE AND SHELF LIFE
Store in airtight original containers at temperatures not exceeding 30˚C.
Keep away from direct sunlight and source of heat. If stored properly, shelf life is 24 months.
PACKAGING
1200 gr x 12 pcs / box
2500 gr x 6 pcs/ box
5 kg x 4 pcs / box