BOTZ ZINC SPRAY

Provides long-term cathodic corrosion protection.
 Resistant to scratches, bending and spot welding. Botz Zinc spray containing 96% pure zinc particles in the dry film, ensuring cathodic protection of ferrous surfaces. Ideally suited for repairing damaged or hot-dip galvanized materials. Offers durable and reliable anti-corrosion protection.


Features

- Excellent for repairing galvanized surfaces.
 - Long-lasting corrosion protection.
 - Superior corrosion resistance through cathodic protection, even when the coating is damaged.
 - Can be overpainted with most commonly used paints.
 - Free from chlorinated solvents.
 - Lead- and chromate-free.
 - High thermal resistance.
 - Conforms to ISO 3549 standard. Contains zinc with a purity > 99%.


Application Areas

- Loading and unloading equipment.
 - Railway equipment.
 - Agricultural machinery.
 - Long-term outdoor corrosion protection.
 - Protection of all ferrous metals against corrosion.


Application methods

- Shake well before use.
 - Shake until the mixing ball moves freely inside the can.
 - Remove loose dirt and rust with a wire brush.
 - For best results, apply 2 thin coats rather than 1 thick coat. Additional coats can be applied after 10–15 minutes.
 - Minimum film thickness required for adequate protection: 40 µm.
 - Do not use on live electrical equipment.
 - Do not apply on sensitive electronic devices.
 - Clean the spray valve by inverting the can and spraying until only propellant comes out.
 - Safety Data Sheet (MSDS) according to EU Regulation No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830.


Additional Information

Typical corrosion protection results mainly depend on surface condition and environmental exposure. On average, protection lasts from several months to more than 1 year outdoors, or more than 2 years indoors. At first use, surfaces should be periodically checked for signs of corrosion. Once the protection time is determined for specific conditions, Botz Zinc Spray can be reapplied at intervals to maintain continuous protection.


 

Physical and Chemical Properties

- Physical state: Aerosol
 - Color: Grey
 - Odor: Characteristic
 - Relative density: 1.431 g/cm³ (at 20°C)
 - Service temperature range: -30°C to +200°C
 - Drying time: 40 minutes
 - Salt spray resistance: 350 h
 - Recommended coating thickness: 40 µm
 - Dry film flexibility: OK on 6 mm mandrel
 - Adhesion to dry steel coating: 0/1 G


 

Storage and Shelf Life

- Store in a cool, dry and well-ventilated area at temperatures between +5°C and +30°C.
 - Protect from direct sunlight, frost, heat sources and open flames.
 - Keep container tightly closed when not in use.
- Shelf life: 3
years in unopened original packaging under proper storage conditions.


Packaging

- 400 ml × 12 pcs / carton



 

Learn More

Related Products